greenhouse gear motor

• Electric motor gearboxes are maintenance-free, compact power resources for driving vent, screen, home and flap ventilation systems in greenhouses.
• Single phase and three phase choices for your individual needs.
• Key feature of these drives are a self-braking worm gear transmission and a built-in linear limit switch device.
shaft-mounted gear motors are finish electromechanical drives where the speed of the installed electric motor is reduced to the desired value using two to four reduction stages. The drives are powerful and durable and show a compact and lightweight design.

The compact design is manufactured possible through the mixture of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight-loss compared to commercially obtainable drive motors. This is attained through the constant application of aluminum die casting technology, which ensures a high amount of rigidity for the gear and motor housing simultaneously.

Each drive is produced and tested particularly for each order and customer. A sophisticated modular system allows for an excellent diversity of types and a optimum degree of customization to client requirements.

Because of their integrated control models, the shaft-mounted equipment motors will be the ideal drives for applications in reversing mode. In both rotation directions, described end positions are secured by two position limit switches. This uncomplicated alternative does not just simplify the cabling, but also makes it possible to configure the end positions efficiently. The high shut-off accuracy of the limit switches ensures safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It really is connected with a metal shaft to turn the pinions for greenhouse ventilation. With the support of electric panel, it can run and stop after set amount of turns. Then it can open up and close the windows for greenhouse ventilation to correct positions.
To maintain the delicate environment inside a greenhouse, environment control systems are a necessity. Several mechanical systems can be applied in this respect; however cup vent drive systems have a tendency to be the most popular. The drive system includes a central gearmotor connected to a 40:1 correct angle reducer with dual result shafts. These OP shafts hook up to long jack shafts that spread across the roof line of the greenhouse linking to multiple rack and pinion mechanisms that open up and close large cup windowpane panes in the ceiling for temperature control.
Depending on the size of the application (length of the shafting, quantity and weight of the windowpane panes) we provides two gearmotor solutions from a modified version of their 200 series parallel shaft line – 1/5 HP and 1/20 HP. The application form Is generally intermittent used; nevertheless the motors are rated continuous since the glass pane windows could potentially be under continuous, subtle adjustment throughout the day.
Gear Motor, also referred to as Engine Gearboxes, is a specific type of electrical motor that’s designed to produce high torque while maintaining a minimal horsepower, or low rate, motor output. Gear motors can be found in many different applications, specifically for the greenhouse, livestock and agricultural sector, our motors are available options to use roof vents, wall structure vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment mistakes and can be very easily taken out without disturbing the entire shaft.
shaft-installed gear motors are complete electromechanical drives in which the speed of the installed electrical motor is decreased to the desired value using two to 4 reduction stages. The drives are high performance and durable and show a concise and lightweight design.

Like just what you found out? Share what you understand concerning greenhouse gear motor with your good friends and family by taking them to our website.