3 Backlash Levels, as low as 3 arc-min
IP65 environment protection
Motor adaptors for just about any servo motor, 50w through 5kW
24 hour delivery
he Circulute 3000 Reducer is EP’s next generation cycloidal velocity reducer. It utilizes 52100 grade bearing steel on most of its speed reduction components. It is offered with a full two year warranty, not tied to hours of procedure, and is able to endure abuse that would break the teeth of ordinary speed reducers.
The EP 3000, easily available with inputs for both servo and induction motors, includes a compact design with single reduction ratios of 11:1 to 71:1 at 95% operating efficiency. Offered in two backlash rankings and multiple mounting choices, the EP 3000 includes a design tough enough for both servo and regular induction electric motor applications. The unique two piece pin housing design guarantees result shaft backlash rankings of less than 6 arc-min.
The EP offers a solution for ultra-high precision, obtaining accuracies up to 20 arc-seconds. The EP allows an application to attain negligible backlash, maintain outstanding rigidity, and increase control stability so that the desired output motion can be easily achieved. The look is truly a unique concept, utilizing a full get in touch with screw-like transmission for high effectiveness and elimination of wear. The unit provides maximum compactness using orthogonal axes and contains a sizable hollow shaft for flexibility.
WORM SERVO GEAR REDUCER
Wide variety of servo gearboxes, designed to fit virtually all servo motors found on the market
Designed for the highest torsional stiffness and the lowest angular backlash, for the utmost torque and overhung loads
Bush with slots and hub clamp for servomotor coupling
Enhanced dimensional compactness due to direct servomotor coupling
Widest range of feasible servomotors coupling dimensions.
The correct technical solution because of a comprehensive selection of sizes, gear stages, transmission ratios, designs and nonstandard designs.
Servo equipment reducers (worm, coaxial, helical and bevel helical units) Catalog SR
Operating instructions for gear reducers and gearmotors (UTD.045)
EP Drive Systems, Inc. is very happy to announce the growth of our selection of Servo Reducers, now offering five degrees of precision to meet any program requirements. The five levels of precision obtainable allows a machine developer to select the mandatory reducer precision to meet up their needs and their budget. They are available in both in-collection and right-angle versions, in torques up to 7,376 lb.ft. and ratios to 3,392:1.
Typical applications for these reducers include rotary & linear axis drives, and materials handling axis drives. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
The mounting faces of the HT, HP, Electronic and B versions are identical, making it possible to interchange a unit with a higher or lower accuracy unit if needed.
A wide range of engine couplings and mounting flanges are for sale to the complete reducer range to install virtually any servo engine and the hollow bore output can be used to mount output shafts, pinion shafts, or other drive components.
These reducers are typically selected based on the peak cycle forces, which often happen during accelerations and decelerations. These routine forces depend on the driven load, the speed vs. period profile for the cycle, and any other exterior forces acting on the axis. For more selection information, please follow this PDF hyperlink.
For application & selection assistance, please call, fax or email us. Your application information will be reviewed by our engineers, who’ll recommend the best solution for your application.
EP Inc. offers a full selection of modular servo gearboxes /worm reducers. The modular style permits configurations with motor input flange and result pinion for rack and pinion drives, in addition to solid result shafts, Hollow bore output, and input shafts for all other positioning applications. The modular style allows for universal installation of the gearbox in any orientation.
They can be used on motors with a NEMA23 standard flange through an adaptor package. As the gears are naturally angled, they result in a short total amount of the motor and its gear.
The series can also be delivered both right- and left-angled and with output shafts on both sides. A 30-mm machine recess for centering and a 4 M5 threaded mounting hole may also be built on the gear’s output side.
Built with a straightforward and robust style, the series offers gearing ratios that range between 6:1 to 75:1. The user can also customize the materials through the order, in order to match the gear to its intended application.
The Precision Planetary Gears of the EPRG series contains a thorough selection of low backlash planetary gearboxes, with up to class 3′ precision, obtainable in several gear frame sizes, with single or multiple stage reduction (for gear ratios from 1:3 to 1 1:1,000). These models likewise incorporate versions with double shaft, right angle shaft and right position output, as well as a full selection of adapters for electric motor mounting, making them capable of meeting certain requirements of also the most diverse applications. They are created for make use of with built-in servo and stepper EP motors, mounted directly or via adaptor flanges, but may also be used with other EP motor types. This selection of products is based on years of encounter and represents the end result of a decade-long study targeted at improving performance.
Maximum precision and dynamics, coupled with excellent torque density, will be the key requirements specific for reliable servo gearboxes in practice. EP provides servo gearboxes for any application and any functionality range. Our low-backlash planetary and right-angle gearboxes reflect our enthusiasm for creativity and the highest levels of precision.
Worm equipment reducers provide market advance solution with effectiveness and flexibility. Low quantity of basic models can be applied to an array of power ratings guaranteeing best performance and reduction ratios from 5 to 1000.
Gear reducers and servo gearboxes of EP Precision Machinery Co., Ltd. are designed for high-performance mechanical products. When the motor speed must be reduced, the result torque improves and send torque totally to the application. We believe that customers will appreciate our equipment reducer to attain their demand. Just visit EP, you will get more details about servo gearheads, servo gearboxes, and equipment reducers. We continue to keep in the years ahead for your support.
Plug the Swiftness Reducer into the desired channel of your receiver, and connect the lead from your servo (or servo wye) in to the man servo lead coming from the circuit plank. The established screw on the blue trim pot, located near the top of the main circuit board, can be used to control the quickness of the servo. Change the set screw fully clockwise (CW) for normal servo speed with no speed reduction, fully counter-clockwise (CCW) for optimum speed reduction, or anywhere in between for partial quickness reduction. The reddish LED indicates three feasible conditions: Slow Blinking = No Transmission; Solid On = No Quickness Decrease; Fast Blinking = Reduced Velocity Setting
Please note that if you make any change to the speed establishing while the receiver is on, you must cycle power to the receiver (change if off and back again on) for the new speed setting to take effect. This circuit can also be utilized in conjunction with this Servo Reverser to cause flap or retract servos to turn in opposite directions for correct function. Guidelines are included for easy set up and use.
IMPORTANT NOTE: This device will only work on a normal, proportional servo. You won’t focus on a retract-type servo, as they do not acknowledge any servo positions apart from clockwise (CW) and counter-clockwise (CCW). Retract servos cannot be slowed down, actually by a transmitter which includes this function, as their style and electronics do not allow it. Verify the FAQ page for more information.
This device will certainly reduce the speed of any regular, proportional servo. Connect it between your receiver and the servo (or servos) you intend to control for a more scale-like movement of flaps or retracts. Adjustable, it can be set to lessen the velocity of your servo from super-slow motion to no speed decrease at all, with an almost infinite quantity of positions in between. Maximum reduction time for a servo to visit 90 degrees is approximately 14 seconds, minimum time (no reduction) is simply the normal swiftness of the servo. Great for reducing or removing the tendency of a plane to “balloon up” when flaps are deployed. It can be utilized to control more than one servo by use of a regular servo Y.
This is the new regulated version that can be utilized on radio systems powered by any size or type of battery, including 4.8-6.0 volt 4-5 cell Ni-Cad/Ni-MH batteries, and HV (high voltage) receivers that are powered by 2-cell 6.6-8.4 volt Li-Po/Li-Ion/LiFE batteries. This unit won’t reduce the voltage likely to your servos.
The EP Gear Reducer may be the perfect solution for servomotor applications such as for example packaging machines, gantries, injection molding machines, pick and place, and linear slides.Provided in concentric shaft, correct position solid shaft, and right angle hollow shaft styles with modular adaptor flanges and keyless compressible bushings to very easily mount to any kind of manufacturer’s servo engine. The EP Series helical gears possess slanted teeth in comparison to spur gears with directly cut teeth, making a smoother gear mesh, yielding significantly lower noise levels.
The low backlash EP planetary servo gear units are designed for the 30 to 350 Nm (265 to 3100 lb-in) torque classes. They were designed to combine the greatest possible versatility and cost-efficiency because not every application requires high-performance elements.
They provide a basis for diverse, dynamic and cost-optimized drive solutions.
The EP planetary servo equipment units are available in the following versions:
PSC = B5 output, easy output shaft
PSKC = B5 output, with keyway
PSCZ = B14, output, smooth output shaft
PSKCZ = B14 result, with keyway
If you need more information regarding servo gear reducer have a look at our website.