small worm gearbox

Small Precison Worm Decrease Gearboxes
There are many of specifications you will have to consider when making a worm gearbox selection.
First, what is the input and output torque requirements? Next, check vendor horsepower/torque charts and select the correct worm equipment reducer.
If the size of the gearbox will probably be an important consideration after that check the reducer dimension specifications, not all manufacturers make compact units. Actually, working with the proper supplier will help you not only find the right equipment reducer but also avoid some of the most common errors in reducer selection. We provide a free guide to assist you find the appropriate supplier to utilize.
For low and fractional horsepower application you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between these two models. Both feature either a hollow or solid result shaft. Both models are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or task is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped installation holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is necessary. This right angle gear motor is indeed versatile it can work just about anywhere.
Features & Options
Double Shaft or Single Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power provides designed and built exclusive, high accuracy mini gearboxes that can’t be found somewhere else. Our miniature gearboxes can be found in numerous configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide custom micro gearboxes that are designed and created to meet your specific specifications.
E mail us for the mini gearbox your application requires, or request a quote on a custom micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, speed reducers, gear drives, and gearmotors. All terms can be used pretty much interchangeably. Please note that the links for our little gear drives include details on the full range of framework sizes for that series or design.
Bevel Box Micro Gear Drive
Our bevel package miniature gear drives are program rated for the maximum balance of overall performance and price. Torque can be balanced to meet your RPM and operating life requirements. Lightweight with low backlash efficiency (as little as 1°, with option of 1/2”).
Result torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a compact package. They provide an output shaft at 90° from the input, and are available in equipment ratios from 1:1 to 40:1. Lightweight but durable, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also known as “shaft to bore gearboxes,” the unit provide a single input shaft that protrudes from opposite sides of the housing; output is a keyed bore. Standard one- and double-end shafts are available and supplied with keys and retainer bands. An array of gear ratios and input sizes are obtainable to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They offer two insight shafts on opposite sides of the frame, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm gear drives deliver high effectiveness efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes create an output at 90° from the insight. They deliver superior functionality in a wide variety applications and are constructed with small footprints, making them well suited for operations where space is bound. They offer high efficiency with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: as little as 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and feature rugged construction for challenging power transfer procedures. Available in three equipment ratios (5:1, 10:1, 20:1), our small worm gearboxes are designed in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and produce a customized miniature gearbox to meet your unique specs. We can produce custom micro gearboxes in any configuration your application requires, with result torque levels as high as 900Nm. We can work from your gearbox styles, reverse engineer a preexisting unit, or help you develop an all-new style that delivers the performance you need. Demand a quote on a customized miniature gearbox or contact us to discuss your specific requirements.
The Ever-Power Advantage: Little is No Big Problem
Broadest selection of small gear reducers
Greased for life
Ruggedly built
Modifications and particular ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and result shafts with drive crucial and retainer rings can be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We offer a basic selection of solitary ended or double ended shafts to put together in these gearboxes. All gearbox shafts are supplied with keys and retainer rings.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our software engineers to discuss your unique needs.
We provide a broad selection of misalignment shaft couplings in in . and metric bore sizes. Inch and metric precision ground shafts are available from stock.
Contact Us for High Performance Miniature Gearboxes
We are the miniature gearbox specialists. All of our micro gear drive models deliver superior overall performance in a small footprint, and are durable enough for challenging function environments. Contact us to find out more about our mini gearboxes, or demand a quote on a customized model that is tailored to your needs.
Additional advantages of worm drive gearboxes include: