Our worm equipment reducers offer an option of a good or hollow result shaft and show an adjustable mounting placement. Both the SW-1 and the SW-5, nevertheless, can endure shock loading better than other lowering gearbox designs, making them ideal for demanding applications.
Rugged compression-molded glass-fill polyester housing
Light-weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Sound or Hollow output shaft
Adjustable mounting position
Worm Gear Speed Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Used on Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Steel Shafts
Flange Mount Models for 56C and 145TC Motors
Our standard 700 Series – the heart of EP Gear’s quickness reducer product line – has been serving industry reliably for over 40 years. Its verified modular design has set the sector standard for functionality and may be the most imitated merchandise in the current worm gear swiftness reducer marketplace. But why accept a knock-off when you can have the initial – from EP Gear.
11 basic solitary reduction sizes
8 basic dual reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
The 700 Series’ large oil reservoir provides efficient heat dissipation and lubrication for for a longer time operating life.
Its multi-position mounting flexibility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged casing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, in addition to greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm equipment is straddle mounted between heavy-duty tapered roller bearings to improve thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of substantial torque and overhung loads.
Pipe plugs allow convenient fill up, level, and drain in practically any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Correct angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) happen to be an ideal meet for motors with great input speeds, or when gearmotor efficiency is important. Get in touch with our technical sales personnel for help determining which gearbox option is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers were created with a hollow bore and allow for a corner change with optional dual output. The reducers can be found in 12 ratios which range from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our correct angle gearboxes are designed with five mounting choices providing versatility when incorporating the reducer into product.
RIGHT ANGLE BEVEL GEARBOX
The proper angle bevel gearbox combines the top features of our right angle worm and planetary inline reducers. With a solid and efficient right angle configuration, our right angle planetary gearboxes offer a robust solution. The right angle bevel gearbox comes in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series little planetary gearbox configurations supply the smallest footprint and quietest procedure of our speed reducers. These gearboxes are designed to handle varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to fit your needs. Our 52 frame size is also available with plastic gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations provide the highest efficiency and best output torque of most our speed reducers. These gearboxes are designed to handle varying loads with small backlash. Planetary gear reducers operate even more quietly than parallel shaft reducers. With 18 ratio choices ranging from 5:1 to 1000:1, we’ve a solution to fit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes will be the top choice for constant duty applications. Their gear cluster design provides an effective method for dissipating warmth. Parallel shaft gearboxes have the shortest amount of our inline gear reducer options therefore they work very well in conditions with limited space. Our parallel shaft equipment reducers provide an affordable drop-in alternative solution for most little parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, velocity reducers, worm gear reducers and worm travel gearboxes. Gear decrease boxes feature a gear arrangement when a equipment in the kind of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually created from bronze and the worms will be metal or stainless steel.
While worm gears are similar to a spur gear, the worm gearboxes are significantly smaller than other equipment reduction boxes. A primary benefit of worm gear reducers is definitely that they create an output that’s 90° from the input and can be utilized to transmit higher torque or reduce rotational speed. Frequently, a worm gearbox offers right hands threads; to improve the direction of the output, a left-hands thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio
Need even more about worm reduction gearbox? Visit our website now!