Product Description
Product Description
Introducing the HMCG-I Series Harmonic Reducer
Get ready to revolutionize your high precision applications with the HMCG-I series harmonic reducer from HangZhou Yijiaang Automation Technology Co., Ltd! This incredible gearbox is designed to take your aerospace, robotics, semiconductors, power inspection, and automation equipment to new heights.
Experience the Power of Harmonic Gear Transmission
Discover the cutting-edge transmission mode invented by American inventor C.W.Musser in 1955. The HMCG-I series utilizes the elastic deformation of flexible working components to achieve movement and power transmission like never before. Say goodbye to traditional rigid components and embrace the flexibility that brings a whole new level of functionality to your applications.
Unleash the Deceleration Principle
With the HMCG-I series harmonic reducer, you can harness the power of the deceleration principle. Watch as the flexwheel, rigid wheel, and wave generator work together in perfect harmony to achieve seamless motion and power transmission. The innovative design ensures that the flexwheel constantly deforms, resulting in precise and efficient movement transmission.
Product Specifications
- Product Name: Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
- Applicable Industries: Machinery, Agricultural Machinery, Car, Robot
- Hardened Tooth Surface: Yes
- Installation Type: Horizontal Type
Don’t miss out on the opportunity to enhance your applications with the HMCG-I series harmonic reducer. Upgrade to the future of precision and efficiency today!
Product Parameters
Model | Reduction ratio | Rated torque at input 2000r/min |
Permissible CHINAMFG torque at start/stop | Permissible max.value of ave.load torque | instantaneous permissible max.torque | Permssibie max.input rotational speed | Permissible ave.input rotational speed | Backlash (arc sec) | Transmission accuracy(arc sec) |
Nm | Nm | Nm | Nm | r/min | r/min | ≤ | ≤ | ||
14 | 50 | 7 | 23 | 9 | 46 | 8000 | 3500 | 20 | 90 |
80 | 10 | 30 | 14 | 51 | 20 | 90 | |||
100 | 10 | 36 | 14 | 70 | 10 | 90 | |||
17 | 50 | 21 | 44 | 34 | 91 | 7000 | 3500 | 20 | 90 |
80 | 29 | 56 | 35 | 113 | 20 | 90 | |||
100 | 31 | 70 | 51 | 143 | 10 | 90 | |||
20 | 50 | 33 | 73 | 44 | 127 | 6000 | 3500 | 20 | 60 |
80 | 44 | 96 | 61 | 165 | 20 | 60 | |||
100 | 52 | 107 | 64 | 191 | 10 | 60 | |||
120 | 52 | 113 | 64 | 161 | 10 | 60 | |||
25 | 50 | 51 | 127 | 72 | 242 | 5500 | 3500 | 20 | 60 |
80 | 82 | 178 | 113 | 332 | 20 | 60 | |||
100 | 87 | 204 | 140 | 369 | 10 | 60 | |||
120 | 87 | 217 | 140 | 395 | 10 | 60 | |||
32 | 50 | 99 | 281 | 140 | 497 | 4500 | 3500 | 20 | 60 |
80 | 153 | 395 | 217 | 738 | 10 | 60 | |||
100 | 178 | 433 | 281 | 841 | 10 | 60 | |||
120 | 178 | 459 | 281 | 892 | 10 | 60 | |||
40 | 50 | 178 | 523 | 255 | 892 | 4000 | 3000 | 10 | 60 |
80 | 268 | 675 | 369 | 1270 | 10 | 60 | |||
100 | 345 | 738 | 484 | 1400 | 10 | 60 | |||
120 | 382 | 802 | 586 | 1530 | 10 | 60 |
Company Profile
Introducing the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
Get ready to revolutionize your machinery with the cutting-edge technology of the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer from HangZhou Yijiaang Automation Technology Co., Ltd. This incredible product is designed to take your transmission components to the next level, providing unmatched performance and reliability.
With its hardened tooth surface, this precision reducer ensures durability and longevity, making it perfect for a wide range of applications including machinery, agricultural machinery, cars, and robots. Its horizontal installation design allows for easy integration into your existing systems, saving you time and effort.
Experience the power of this ultra-thin harmonic reducer, which boasts exceptional speed reduction capabilities. Its advanced gearbox technology guarantees smooth and precise operation, allowing for seamless performance in CNC machine tools, packaging machinery, printing machinery, automation equipment, joint robots, medical equipment, AGV, and more.
At HangZhou Yijiaang Automation Technology Co., Ltd, we are committed to providing you with the highest quality products and services. Our team of experts is dedicated to technological innovation and customer satisfaction, ensuring that you receive the best possible experience.
Don’t miss out on the opportunity to enhance your machinery with the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer. Join us in making the world move and achieve new levels of efficiency and productivity. Get in touch with us today!
Detailed Photos
FAQ
Introducing the Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer
Are you in need of a top-notch gearbox/speed reducer for your machinery, agricultural equipment, car, or robot? Look no further! HangZhou Yijiaang Automation Technology Co., Ltd has the perfect solution for you – our Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer.
With a hardened tooth surface, this reducer is built to withstand even the toughest conditions. Its horizontal installation makes it easy to integrate into your existing setup.
When choosing a gearbox/speed reducer, it’s important to provide the necessary information to ensure the perfect fit. You can start by providing the motor drawing with parameters, and our expert engineers will recommend the most suitable gearbox model for your reference. Alternatively, you can provide the following specifications:
- Type, model, and torque
- Ratio or output speed
- Working condition and connection method
- Input mode and input speed
By providing these details, you can rest assured that you’ll receive a gearbox/speed reducer that meets your exact requirements.
Don’t miss out on the opportunity to enhance the performance of your machinery with our Industrial Robot Ultra-Thin Series Hmcg Harmonic Precision Reducer. Get in touch with us today and experience the difference!
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Application: | Machinery, Agricultural Machinery, Car, Robot |
---|---|
Hardness: | Hardened Tooth Surface |
Installation: | Horizontal Type |
Layout: | Coaxial |
Gear Shape: | Cylindrical Gear |
Step: | Single-Step |
Samples: |
US$ 200/Piece
1 Piece(Min.Order) | |
---|
Customization: |
Available
| Customized Request |
---|
Lubrication Practices for Extending the Lifespan of Agricultural Gearboxes
Proper lubrication is essential for ensuring the longevity and optimal performance of agricultural gearboxes. Here are some essential lubrication practices that can help extend the lifespan of these gearboxes:
- Choose the Right Lubricant: Select a high-quality lubricant specifically designed for gearboxes and agricultural machinery. Consider factors such as viscosity, temperature range, and load-bearing capacity to ensure compatibility with the gearbox’s operating conditions.
- Regular Inspection: Perform regular visual inspections of the gearbox and lubricant to check for signs of contamination, wear, or inadequate lubrication. Address any issues promptly to prevent further damage.
- Cleanliness: Maintain a clean environment around the gearbox to minimize the risk of dirt, debris, and moisture entering the gearbox housing. Contaminants can compromise the lubricant’s effectiveness and accelerate wear.
- Lubricant Level: Monitor and maintain the proper lubricant level in the gearbox. Insufficient lubrication can lead to increased friction and heat, causing premature wear and potential damage to gears and bearings.
- Replace Lubricant: Follow the manufacturer’s recommendations for lubricant change intervals. Over time, lubricants can degrade, lose their properties, and become contaminated. Regularly replacing the lubricant helps ensure optimal performance.
- Use Lubrication Schedule: Create a lubrication schedule based on the gearbox’s usage and operating conditions. Stick to the recommended intervals for applying or changing lubricant to prevent under-lubrication or over-lubrication.
- Appropriate Lubrication Method: Follow the manufacturer’s guidelines for the correct lubrication method, whether it’s through oil bath, grease, or automatic lubrication systems. Proper application ensures even distribution of lubricant across gear surfaces.
- Temperature Considerations: Be aware of temperature variations in your operating environment. Extreme temperatures can affect lubricant viscosity and performance. Choose a lubricant that can handle the temperature range of your equipment.
- Expert Advice: Consult the gearbox manufacturer or a lubrication specialist to determine the best lubrication practices for your specific agricultural gearbox model and application.
By adhering to these lubrication practices, farmers can maximize the lifespan of their agricultural gearboxes, minimize downtime, and ensure efficient and reliable operation of their equipment.
Handling Varying Torque Demands with Agricultural Gearboxes
Agricultural gearboxes are designed to handle the varying torque demands associated with different tasks in farming operations. The torque requirements can vary based on factors such as the type of task, the soil conditions, the terrain, and the machinery’s speed. Agricultural gearboxes are equipped with features that allow them to adapt to these varying torque demands:
- Gear Ratio Selection: Agricultural gearboxes often come with multiple gear ratios, allowing operators to select the appropriate ratio for the task at hand. Lower gear ratios provide higher torque for tasks that require more force, such as plowing or tilling, while higher gear ratios offer higher speeds for tasks like mowing or transporting.
- Torque Multiplier: Some agricultural gearboxes are designed with torque multipliers that enhance the torque output from the engine to the wheels or implement. These multipliers are engaged when higher torque is needed, helping the machinery handle heavy loads or challenging terrain.
- Adjustable Speeds: Many agricultural gearboxes allow operators to adjust the speed of the machinery to match the torque requirements of the task. This flexibility is essential for tasks that involve both high-torque, low-speed operations and high-speed operations with lower torque needs.
- Power Take-Off (PTO) Options: Agricultural gearboxes often feature power take-off mechanisms that enable the transfer of power from the engine to attached implements. These mechanisms can be designed to provide varying torque outputs to suit different implements, such as rotary tillers, balers, or pumps.
The ability of agricultural gearboxes to handle varying torque demands is crucial for ensuring efficient and effective farming operations. By offering adjustable gear ratios, torque multipliers, and adaptable speeds, these gearboxes empower farmers to optimize their machinery’s performance based on the specific requirements of each task.
Key Features of a Durable and Reliable Agricultural Gearbox
A durable and reliable agricultural gearbox is crucial for the efficient operation of farming equipment and machinery. The following key features contribute to the durability and reliability of agricultural gearboxes:
- High-Quality Materials: Agricultural gearboxes are often exposed to harsh conditions, including dust, debris, and varying weather. Using high-quality materials, such as strong alloy steels, can enhance the gearbox’s resistance to wear, corrosion, and other forms of deterioration.
- Rugged Construction: The gearbox should have a robust and rugged construction to withstand the stresses and strains associated with agricultural tasks. Reinforced housings, precision machining, and robust seals can help prevent damage and ensure longevity.
- Effective Lubrication System: Proper lubrication is vital to reduce friction, dissipate heat, and prevent premature wear. Agricultural gearboxes should be equipped with efficient lubrication systems that ensure all components are adequately lubricated, even during extended operation.
- Sealing and Protection: Dust, dirt, and moisture are common challenges in agricultural environments. Effective sealing mechanisms, such as gaskets and seals, prevent contaminants from entering the gearbox and protect internal components from damage.
- Heat Dissipation: The gearbox should be designed to dissipate heat effectively, especially during prolonged operation. Overheating can lead to lubrication breakdown and premature wear. Cooling fins and adequate ventilation can help maintain optimal operating temperatures.
- Gear Quality and Precision: High-quality gears with accurate tooth profiles and precision manufacturing ensure smooth and efficient power transmission. Properly machined gears reduce noise, vibration, and the risk of gear failures.
- Advanced Gear Design: Some agricultural gearboxes may feature advanced gear designs, such as helical or planetary gears. These designs offer improved efficiency, reduced noise, and increased load-bearing capacity compared to traditional spur gears.
- Overload Protection: Incorporating overload protection mechanisms, such as shear pins or clutch systems, can prevent damage to the gearbox and other connected components in case of sudden high loads or jams.
- Easy Maintenance Access: The gearbox should be designed with maintenance in mind. Accessible inspection points, drain plugs, and fill ports make it easier for operators to perform routine maintenance tasks.
Manufacturers often engineer agricultural gearboxes to meet these requirements, ensuring that they can withstand the demanding conditions of farming operations and contribute to the reliable performance of agricultural machinery.
editor by CX 2024-03-29
Leave a Reply